top of page
Search

Far Infrared vs Near Infrared: Which Suits Your Outdoor Space?

Writer: Andrew Crookes
Andrew Crookes
20 hours ago
10 min read

Infrared heater above a Yorkshire garden seating area

Near infrared gives fast, intense heat that copes with open air. Far infrared gives gentler, softer warmth that works best where there is a roof, walls or screens to hold it in. For most patios, terraces and beer gardens, the real question is not which wavelength is “better” but how much cover you have. A well-built awning or pergola with a heater planned in from the start is what lets either type do its job.

 

This guide is for homeowners, hospitality owners, schools and property managers who are choosing a heater for a shaded outdoor space. It covers the difference in plain terms, where each type belongs, what to check when a heater sits under a fabric or louvred roof, and how the roof itself changes the result.



TL;DR

 

  • Near infrared (short wave) is hot, fast and bright. It suits open or exposed spots and short stays.

  • Far infrared (long wave) is softer, gives off no glow and suits sheltered areas where people sit for longer.

  • Both heat people and objects directly rather than the air, but line of sight to the heater matters a great deal for comfort.

  • Cover is the deciding factor: an awning, pergola or veranda, with side screens where needed, helps either type work better.

  • Heater height, clearance from fabric and electrical protection should be settled at the design stage, not added later.

 

Table of Contents

 

 

What near and far infrared actually mean

 

Infrared is heat that travels as radiation, like sunshine, rather than by warming the air first. Engineers split it into bands by wavelength. The UK government’s infrared heating report from the Department for Energy Security and Net Zero (August 2025) divides infrared into three types:

 

Band

Also called

Wavelength

Short wave

Near infrared (NIR)

0.75 to 1.4 µm

Medium wave

Mid infrared (MIR)

1.4 to 3.0 µm

Long wave

Far infrared (FIR)

3.0 to 100 µm

A micrometre (µm) is a millionth of a metre. The shorter the wavelength, the hotter the emitter usually runs and the more of its output leaves as radiant heat. That is why near infrared units are the ones that glow orange or red, while far infrared panels stay dark.

 

You will also see the middle band mentioned. Medium-wave heaters sit between the two in intensity and are the usual choice for semi-covered spaces. If a supplier offers short, medium and long wave, they are describing the same scale.

 

How each type feels to sit under

 

Near infrared is the closest thing to standing in strong sun. The heat arrives almost instantly and in a fairly narrow beam. It is felt strongly on the skin, which is excellent for a cold evening on an open terrace. Because it usually comes with visible light, it also adds a glow, which some venues like and some homeowners do not.

 

Far infrared has no visible light. The Energy Saving Trust describes home infrared panels as producing a less intense far infrared heat than glowing electric patio heaters, and says the warmth feels like sunshine on your skin even on a cold day. It also notes that stepping into shade feels much cooler, because you lose the direct radiation. That is the key to using any infrared heater: it warms what it can “see”.

 

The government report backs this up. In its user trials, which involved 114 people in a test chamber, line of sight to the heater was the most important variable for comfort. People who were not in line of sight of the emitter, or were far from it, could be uncomfortable. Participants also described far infrared panel heat as gentle and friendly compared with the fiercer feel of conventional patio heaters.

 

Practically, that gives you a simple rule:

 

  • If guests move around, stand, or sit at scattered tables, you need strong, wide coverage, which favours near infrared.

  • If people sit still for an hour or more at a defined spot, such as a dining table or a seating area under a roof, far infrared is more comfortable.

 

Which one for which outdoor space

 

The wavelength matters less than the conditions around it. Moving air carries warm air away, and open spaces have an endless supply of cold air. Heat that relies on warming the air first loses badly. Radiant heat does not need the air at all, which is why infrared works outdoors in the first place. Heating guidance from local authorities makes the same point about shelter: an overhang on a pergola protects the heated area from wind, and reflective barriers such as glass bounce radiated heat back into the space, as set out in Warrington Borough Council’s Green Guide to Outside Heating (2019).

 

Here is how that plays out in practice.

 

Situation

Usually the better fit

Why

Open terrace, little cover, windy site

Near infrared (short wave)

Fast, intense, less dependent on still air

Pub garden or restaurant terrace with a retractable awning

Near or medium wave, positioned with care

Quick warm-up when customers arrive, adjustable as cover changes

Pergola or veranda with a solid roof and side screens

Far infrared panels or medium wave

Cover holds the warmth, gentle heat suits long stays

Enclosed or glazed seating area

Far infrared

No glow, comfortable for hours

School or nursery covered play area

Far infrared, mounted out of reach

Soft heat, no bright element

This is general guidance, not a rule for every site. Exposure, ceiling height, how many people use the space and how long they stay all change the answer. That is why we look at the space first and the heater second.

 

Does far infrared go deep into the body?

 

Many pages on this subject, particularly sauna and therapy sites, talk about how deeply infrared penetrates. For outdoor comfort heating it is worth knowing the facts. The international body on non-ionising radiation, ICNIRP, states in its statement on infrared radiation that near infrared (IR-A) penetrates several millimetres into tissue, while far infrared (IR-C) penetration is of the order of 0.1 mm or less, with 95% absorbed by about 0.25 mm.


Near and far infrared penetration compared

What you feel from a far infrared patio panel is warmth at the surface of the skin, much as with sunshine. That is exactly what you want from a comfort heater. Nobody needs it to go deeper to enjoy an evening outside.

 

Choosing and fitting a heater under an awning or pergola

 

Once a heater sits under fabric, timber or a retractable structure, the installation matters as much as the type. The points below come up on almost every project.

 

  1. Mounting height and angle. Heaters are normally mounted above head height and angled down towards where people sit. The manufacturer’s instructions set the minimum height and safe distances, and these must be followed, particularly near fabric or timber. Our guide to pergola heater placement covers height, angle and position in detail.

  2. Clearance from fabric. Awning fabric, signage and timber need the clearance the manufacturer specifies. A heater that suits an open terrace may not be suited to sitting close under a canopy.

  3. Electrical protection. Outdoor heaters need an appropriate weather-protection rating for how exposed they are, and the supply should be protected and correctly sized by a qualified electrician.

  4. Non-overlapping coverage. Position heater outputs so they do not overlap, following the manufacturer’s guidance on the area each unit covers. This avoids hot spots and wasted energy.

  5. Gas or electric. If you are weighing up a gas unit, read our guide to UK patio heater rules and Gas Safe checks before anything is fixed under a canopy.

  6. Fire and safety planning. Commercial venues should include heaters in their fire risk assessment and shutdown routine.

 

If you are planning a cooking area as well, the same thinking applies. See pergola over an outdoor kitchen for the installer checks to settle first.

 

The simplest way to avoid retrofitting problems is to design the heater, wiring, lighting and cover together. When we specify an awning or pergola, heaters, LED lighting and weather sensors are among the add-ons we can include from the start, so cable routes and mounting points are planned into the structure rather than bolted on afterwards. For a wider look at why this matters, read why outdoor heaters matter for your space and how heaters work in awning systems.

 

Fabric roof or louvred roof: how the cover changes the heat

 

People searching for infrared types often end up comparing roof types too, and for good reason. The roof decides how much of your heater’s work is kept.

 

A fabric roof, such as a retractable awning or a pergola with a fabric canopy, is flexible. It extends when you want shade or shelter and folds away when you want open sky. Under it, you get a defined sheltered zone that suits a heater aimed at the seating area. It is also quick to adapt for different times of day and different seasons. Awnings can be manual or electric, and weather sensors can retract them if the wind rises.


Infrared heater beneath a fabric pergola canopy

A louvred roof is made of angled blades that rotate to open, partly open or close. The roof can be set to let in light and air, to shade, or to shut for rain protection. Used with side screens, a closed louvred pergola can create a more enclosed room-like space, which suits gentle far infrared heat.

 

A few questions help you decide:

 

  • How often will you use the space in cold or wet weather? If the answer is often, a roof that closes fully and screens on the sides give far infrared the shelter it needs.

  • Do you want open sky at times? A retractable fabric roof can be pulled back entirely.

  • How exposed is the site? On a windy Yorkshire terrace, side screens matter as much as the roof.

  • Who uses it? A restaurant needs flexible, quick-to-change cover. A home may value a permanent outdoor room.

  • Do you need planning advice? Larger structures and some locations can raise planning or building questions, so settle this early with us and your local council.

 

Our pergolas and retractable awnings pages show the options, and the pergola installation guide explains what happens on site. If you want the roof to help in summer as well as winter, see our guide to keeping a UK patio cool in a heatwave.

 

Common mistakes to avoid

 

  • Choosing on wattage alone. A bigger unit does not make up for a poorly positioned one.

  • Forgetting line of sight. If the heater cannot “see” the people, they will not feel it.

  • Mounting too low or too close to fabric. Follow the manufacturer’s distances.

  • Treating the heater as an afterthought. Wiring added late is harder to hide and harder to place well.

  • Ignoring the wind. Even radiant heat feels weaker on an exposed side. Screens help.

 

Planning the whole space with Infinity Awnings

 

We design, supply and install retractable awnings, pergolas, verandas and canopies for homes, hospitality venues, schools and other commercial properties across Yorkshire, Derbyshire, Nottinghamshire and Lincolnshire. Operation can be manual or electric, and add-ons include heaters, LED lighting, weather sensors and side screens. We have over 15 years of experience, and our approach is consultative and without pressure.

 

That means you can talk through your space, how you use it and the kind of warmth you want, and have the cover and the heating planned together. Start with the page that fits you: residential awnings and canopies, commercial awnings and canopies, or outdoor solutions for schools. You can also request a free quote.


Infinityawnings

Our view

 

We are asked about near and far infrared more and more, usually by someone who has already bought a heater and found it does not do what they hoped.   The pattern is nearly always the same. The heater was chosen on its own, before anyone thought about the roof, the wind or where people would actually sit. Infrared is a superb way to extend the use of an outdoor space, but it works with the structure, not instead of it.   Our advice is to decide what the space is for first. Is it a dining terrace that needs to fill quickly on a cool evening, or a family seating area used for hours? Then choose the cover, whether a retractable awning or a pergola, and plan the heating, lighting and screens as part of one design. As specialists in awnings, pergolas and verandas, with heaters among the add-ons we offer, we would rather get this right on paper than adjust it on site.   Bring us the space and we will help you shape it.   Andrew

 

FAQ

 

Is near infrared or far infrared better for a patio?

 

For a very exposed patio with little cover, near infrared is usually the better match because it delivers intense heat quickly. For a covered patio or pergola with side screens, far infrared gives a gentler warmth that suits longer stays. The amount of shelter decides it more than the wavelength.

 

Does far infrared penetrate the skin?

 

Only at the surface. ICNIRP reports that far infrared penetrates around 0.1 mm or less, while near infrared reaches several millimetres. The warmth you feel from a far infrared patio panel is skin-surface warmth, like sunshine.

 

What are the three types of infrared?

 

The government’s infrared heating report lists near or short wave (0.75 to 1.4 µm), medium wave (1.4 to 3.0 µm) and far or long wave (3.0 to 100 µm). Patio and terrace heaters generally come from these three groups.

 

Can I fit an infrared heater under an awning?

 

Yes, in many cases, provided the heater is rated for outdoor use, mounted at the manufacturer’s stated height and clearance from fabric, and wired by a qualified electrician. Planning it before the awning is installed makes this much simpler. We can discuss heaters as an add-on when you request a quote.

 

Should I choose a fabric roof or a louvred roof?

 

Choose a retractable fabric roof if you want flexible cover that folds away to open sky. Choose a louvred system if you want adjustable blades and a roof that can close fully, ideally with side screens for colder months. Your site, wind exposure and how you use the space should guide the decision.

 

Sources

 

Recommended

 

 
 
 

Comments


bottom of page